Building the BADDEST John boat for under $800 bucks!! DIY

Video quality	The size	Download

Information Building the BADDEST John boat for under $800 bucks!! DIY

Title	:	Building the BADDEST John boat for under $800 bucks!! DIY
Lasting	:	24.49
Date of publication	:
Views	:	193 rb

What mud motor is that
Comment from : Landen Freeman Outdoors

Nice job young man
Comment from : Dude Wilson

That color is perfect! It makes me want to paint mine whether it needs it or not It all worked out great Nice refresh
Comment from : Ralph Cantrell

Tiles ba, gamit din itong vlog pasaring sa sasakyan pa rin
Comment from : Apollo Morella

Nice find and build
Comment from : Bret Howell

Where did you find that gator glide stuff at? I have a 12ft flat bottom and I never knew I needed that until I saw this video
Comment from : ryan wolfe

I wonder what the fish think about the music you be playing while out and about :D
Comment from : Alexander Jack Almgren

What color paint did you use from sea hawk??
Comment from : Scott Clark

Where did you get those stencils?
Comment from : Landon Speer

How’d the paint on the outside hold up I just did mine and seems so come off very easily
Comment from : Colby jones

Clean
Comment from : Unarius Miller

Where did you get the stencil from?
Comment from : Samuel Lewison

Just got recommended to your video we'll see how it goes hoping for the best😎
Comment from : bill y

Well done little brothers! Awesome build! Thanks for the ride aloha
Comment from : T D

How many batteries are you using to power the LED light bar and speakers? I'm in the middle of building my boat and not sure on battery for a stereo/speaker and trolling motor
Comment from : Jonathon Pendergraft

How wide is the boat
Comment from : HTS OutDoors

Watching paint dry
Comment from : Randall Dennis

what sound system did you use bro ?
Comment from : RiShad Wilkes

Where'd the grab bar come from?
Comment from : Joe Sezzz

What motor and setup is this and where can I find one?
Comment from : Nick Cummings

Love It I Have The Same Boat I Want To Build Mine The Same Way 😂😂😂
Comment from : John Scott

1 hose and 2 nuts
Comment from : Aleem Rahim

reply to my comment on what you all bought because it looks so good i what to copy it lol
Comment from : Lorenzo Sherbo

Do you know how to read spark plugs? You don't have to worry about the main jet there is only one for a stock engine change the muffler, you should change the jet But getting your plugs to run coco tan is where you want to be
Comment from : BobbyDuke

does bro not know that he just made one of the cleanest john boats i ever seen 🤐😍
Comment from : hunnahuntin

Could you please tell me what light bar you used? It looks like you just drilled straight through the bow rail and it'd help to know what length it is even
Comment from : Griffin Howell

What does the gator glide do ?
Comment from : Kevin Ellis

I’m glad I seen this I’m gonna build my job boat like yours 🔥🔥
Comment from : Joseph-817-Texas

Turned out bad ass Thanks for sharing
Comment from : Mntnere

when you say you grinded on the bottom what did you use? and what did you use to sand? did you use gator base or just the glide? thanks
Comment from : Jonas Tatu

No need to waste a rocker panel switch for a stereo that already has its own power switch Wire it straight to power and run a inline fuse for protection Good work btw I built my own Jon boat as well
Comment from : North American Productions

You should make a list of everything you used
Comment from : MBowden11

Damn son Sharp boat
Comment from : Willie Make it

Can you drop the link for where you got the stencils?
Comment from : Southern Raised Outdoors

For the gator glide can you use that on pirouge i have a 12ft aluminum also? and if so which one should i use? and where did you find the stencils at?
Comment from : Camellia City Sportsman

Jason Mewes minus the city and hard drugs
Comment from : fed up

This was so fun to watch! It’s definitely inspired me to do a project like that Thank y’all and God bless!
Comment from : Jonnie Box

Just stumbled upon your video and really enjoyed it I used to have a Jon Boat growing up in Florida and now that I'm back, I want another one! I used to see those long tailed motors running up and down the canals of Bangkok, Thailand back in the 1970's but they used engines out of Toyotas; I never knew they caught on here Great job!
Comment from : Peter Clapham

Good work man , i Love this setup !! Jon boats aren't big in Australia
Comment from : Daz Taz

Would you sell it to me
Comment from : Jacob Scott

where did you get the stencils for the camo?
Comment from : Shawn Dickens

Hey bro where did you buy the GATOR GLIDE from
Comment from : Wiggle Wiggle Wiggle

I think anyone would be happy to have that boat I think you did a very good job pat yourself on the back if that boat started out at 800 I think you'll get at least three grand for it now
Comment from : John Baker

You couldn't even buy the Boat for $800
Comment from : Big Kou

That’s awesome Any chance you could add links to the lights, wiring and speakers?
Comment from : Andrew Emington

Nice work, I have a project Jon to do and like the camo so will try it out brEnjoy your hard work !!!
Comment from : John Pritchett

I subscribed o_o
Comment from : Tiny Boat Nation

I really like the motor set up for you think it would be good in a lake set up
Comment from : Carl Bridgeforth

Bad Ass boat!! I’m very motivated now to do something very similar to your outstanding project, congratulations man You’ve earned a subscriber!
Comment from : Dan Le

Where did you get the 4 switch panelbrThx
Comment from : cmack003

Can you put a surface drive on any boat or does it have to be certain types of John boats??
Comment from : Jacob

How wide is the floor?
Comment from : Peyton Oberg

hey man was their foam where you cut out for all the stuff to go? i have foam in mine but i wanna cut out the middle and put hinges and boards like you did to have places to put everything
Comment from : Chris Gambrell

great video aren't the nav lights suppose to be visible from the side?
Comment from : Seamus Brennan

Awesome job on the boat, love it
Comment from : Eric Chase

Ever thought about putting links in the bio? Sure would keep you from having to repeat yourself🤣🤣
Comment from : Vapin Bachelor

Nice work bud!! Looks grt!
Comment from : Brian Guillen

What was the top speed with the 420
Comment from : BassKing Sanders

Dude that boat is amazing ! Great job with the restoration man Question what is the brand name of that boat and where could I find one like that? I love what you did with the speakers and everything man Thanks for any advice
Comment from : Adrian Sedillo

You removed all the foam? You’ll lose everything in about 10 seconds if you ever take on any water
Comment from : John Conley

Boat is amazing! but taking that foam out is risky
Comment from : BassKing Sanders

This is a really awesome build!
Comment from : The Young Superintendent

What components for the speakers did you use or was it just a kit from boss?
Comment from : Creek Cartel

Where did you get the grab bar
Comment from : Clayton Laird

Tip if you want wood to last in a boat???? coat it with epoxy resin a few times It will do 2 things Absorb the epoxy making the wood more structural and water proof Your wood will last a crazy long time
Comment from : Mr Ski

Very nice wiring job
Comment from : Jonathan Brooks

Good job dude looks good I’m getting a used 1542 today
Comment from : keith l

Paint job came out nice! Sick jon boat!
Comment from : A Better Outdoors

Is that a 1436? Just curious cause I’m looking to buy one and I’m scared a 36 wont be wide enough Also what size long tail was on it? I know it has a surface drive now but curious about the old one
Comment from : Kaden Duford

Tree bark goes up not sideways but it still looks good
Comment from : Isaac Mccoy

What screws/bolts/taps etc did you use to screw the wood that the grab bar is mounted on to the ribs on the boat? And did it hold good or break loose
Comment from : Aaron Dixon

So what is the motor that you are using for your John boat?
Comment from : Thomas Richmond

You did a awesome job, I know what iam going to do now What are you using to power everything?
Comment from : Plinkin Eden

How many cans of spray paint did it take
Comment from : Camden McGallagher

Awesome video! Paint job turned out nice and the rip thru the marsh at the end was even better
Comment from : cr skyes

Noice,!
Comment from : eddie b

Hell yeah dude 🤘🏼
Comment from : Parker carroway

Great job wanna come do a 12ft'er?
Comment from : Steve Westphal

Very nice
Comment from : Cory Sisum

That boat needs a Mercury 25, it'll fly with something like that!
Comment from : 850 Outdoors

How did you prep the surface for the paint for the boat and the gator glide for underneath the boat?
Comment from : KX500

With those predator motors man they can’t be turned on there side long Oil will come threw the valve cover vent tube and leak into the carb I’ve had a go devil crawfish model that’s done this multiple times
Comment from : James Gerrald

Keep up the good videos
Comment from : Caleb

I have that motor motor on a Mud Skipper Twister and really like it on my 1436 Lone Star I know that you have a surface drive now and I wanted a surface drive but can't afford it The Twister has a shorter shaft and I have almost the same angle as a surface drive, which is very close to an outboard People worry about that flexible shaft and they send a spare with it, which kind of made me worry But I've throttled the hell out of it with no problems, so far I grease it every time I load it on my trailer though and I got rid of that three bladed prop before I even mounted it on the boat I need to pop over to the video about your surface drive and ask where you bought the kit from I love my little mud boat and do all of my fishing from it Oh, I used Gator Glide on mine too That stuff is amazing!
Comment from : Texasplumber

Any way you can tell me exactly what stencil kit you got? I really like the way yours turned out
Comment from : Seth Turner

Do you have instagram?
Comment from : Blackatan music

This is the perfect huntin boat good job man
Comment from : patrick carlin

Nice build what speakers did you end up using? Also how much fun time you get in the speakers
Comment from : DominicBD

Look up some videos on the Predator 420 they will show you how to remove the governor you will probably get everybit of 5-10 more mph and lots more torque
Comment from : Dylan Coughlin

Teeth on bendex drive caught on flywheel ?brLet's see that speed boat rip with new prop
Comment from : Mike DiMarco

Cool! Awesome boat for duck hunting, fishing, or whatever! Thanks for sharing!
Comment from : danawalker55

Your stand up grab bars on the wrong side and you’re standing on the wrong spot you’re supposed to be using your left hand to drive and steer instead of your right I know it’s uncomfortable but when you get used to it you have way more control standing on the right side
Comment from : Ashley Piche

You should put a sea-Doo jet driving in it make a jet John lol that would be awesome
Comment from : Ashley Piche